Linksys Velop is one of the most effective WiFi range extenders that allow its users increase their current internet access. To fully benefit from Velop’s coverage of the internet after Linksys Velop Setup in every corner and crevice of your home it is essential to put this device (Linksys Velop) at its most optimal position.
Keep in mind that when the position the extender is located, or the location of Linksys Velop extender is not adequate, you’ll encounter frequent or slow WiFi connectivity issues with certainty even if you’re using an upgraded internet plan.
Perhaps you’re thinking, where should you put where to put your Linksys Velop extender don’t you? Don’t worry about it! In this article you will learn about the top Linksys Velop extender placement. Read on!
Best Location for Your Linksys Velop Extender
To ensure uninterrupted internet connectivity even in the dark zones of your house, take these points in mind for the ideal extension device placement.
The Central Location
It is the Linksys Velop WiFi range extender transmits WiFi signals throughout the entire direction of your home. So, when you place on your Linksys device, be sure to keep it from corners. The reason is that placing it in a corner or close to corners won’t provide you with the full-home WiFi coverage.
In accordance with this, put the Linksys Velop extender at the middle of your home and to be within reach of your router.
Additionally, when placing the Linksys Velop extender next to your router, it’s recommended to place it (router) in a open area. If you’ve placed your router in cabinets or under a table, you aren’t in a position to make the most from your Velop’s WiFi signals. Why? because the Velop increases the bandwidth of your WiFi range that comes from your router. When your router’s location is not visible and not visible, how can it transmit WiFi signals to the extender? If the extender isn’t receiving WiFi signals from your router, what will it do to (Velop) extend the Internet access.
Read Also: My Netgear Router is Flashing Red. Help Me Fix It!
In order to get the most the Linksys Velop and your existing router WiFi signals, connect them both together:
- The center of your house
- Within reach of one another
- Sur a cleaner, higher and free of congestion
After you’ve finished installing the WiFi range extender in the central area of your home, and close with your router you’re free to test the expanded WiFi coverage by visiting the Linksys Velop login website. Let’s hope that you are able to access the Linksys router login page for the Linksys Velop device in blink of an eye, and without trouble.
Keep WiFi Interference at Bay
To get the most of Your Linksys Velop WiFi signal it is advised to keep it out of the range of neighboring SSIDs. The best method to avoid interference from WiFi signals is to turn off or forget all unknown SSIDs that are in the range of your Velop’s WiFi.
In a Nutshell
If you follow the two important suggestions above, you’ll surely be have the best experience out of the Linksys Velop WiFi signals. There are a few points we’d like to discuss with you prior to closing this article.
- Make sure to update the firmware of the Linksys Velop regularly (whenever available).
- Offer your Linkys’ Velop a new beginning by power-cycling it once a week. Before you apply this, bear in mind: both power-cycling as well as Velop Linksys extender resets are two distinct processes.
Linksys extender setup reset will restore your Velop back to its factory default settings and restarting or power cycling the system (Velop) will chill it and provide it with a fresh start.
