Fix: Netgear Router Orange Light Issue

A power light on the Netgear Nighthawk router should go green when you turn it on after configuring the device via the routerlogin network. However, if it turns in the opposite direction, to orange. If this is the case then you’re in danger. However, don’t worry as we’ve got your back. The light that is orange in your Netgear router can be resolved easily using the procedures described within this post. In this situation, continue reading.

How to Fixed Netgear Router Orange Light Issue

  • The Nighthawk Router must be restarted.

It is possible that your Netgear Nighthawk router must be rebooted first. It’s possible that restarting your device can resolve the issue with the orange light.

These are steps you have to follow to reboot your device:

  1. It is essential to remove any devices that connect to the router’s network.
  2. Remove all power sources from the Netgear Nighthawk R7000 manual.
  3. You must be patient for a few minutes.
  4. Connect to the Netgear router to power, then turn it off.

Check if the orange light is shining on the device. If so you should proceed.

You can also read: My Netgear Router is Flashing Red. Help Me Fix It!

  • Make sure you have your Power Supply

It is likely that the wall socket isn’t offering enough power for you Netgear Wireless router. This is why you should check to see if your wall outlet is defective before you use the device. If that’s the case then try another wall outlet or get your Netgear router replaced.

  • Examine your Ethernet Connection

Have you connected the Netgear Nighthawk router with the modem using a damaged Ethernet cable? If the answer is yes, then there’s several reasons that you’re experiencing issues with the red light on your router from Netgear.

Damaged Ethernet cable can exacerbate the issue, which is why it is recommended to purchase an entirely new cable prior to doing any further troubleshooting. For added security ensure that the connection between both devices a firm tight squeeze.

  • Do you need to update the Netgear router firmware?

If the latest firmware update for the Netgear router isn’t helping you resolve the issue with the orange light The firmware is most likely outdated. Consider updating the firmware of your wireless device.

To update your firmware for the Nighthawk router, you must login to the router’s administrator page, go to Settings and select Firmware Update. Firmware Update.

  • Test Mac Cloning

Did updating the firmware on your router via your Netgear Nighthawk Router login page not been helpful also? If so, MAC cloning is worth giving it a shot. Here’s how you can proceed:

  • Start your default Nighthawk login page, and sign in using the credentials supplied.
  • Select the menu option for Settings, then choose Advanced.
  • Make use of the MAC Cloning option.
  • Choose the appropriate option and then press Apply.
  • The changes you’ve made for the device are recorded in just a few minutes.

Do you see the orange light that is flashing on the Netgear router not working? It’s impossible to do anything other than reset your device’s WiFi at this point, but regrettably.

  • Perform Factory Reset by default

Here’s how can setup Netgear Nighthawk router back to default settings:

  1. If you want to change the settings of your Nighthawk Wireless router you first need to locate its reset button.
  2. If you’re able to make use of the oil pin gently to push the pin and keep it in place.
  3. Alternatives to the reset button are either a paper clip or toothpick.
  4. Be patiently awaiting the returning of the Netgear router to its default configurations.

After that, you need to modify the settings of the settings of your Netgear Nighthawk router and check whether the issue with the orange light persists. It is possible to use the Netgear Nighthawk app on your PC to do this.

For Conclusive

The red light on the Netgear router will go out If following the troubleshooting procedures as described within this piece. What do you think about the issues addressed in this article? Make sure you inform other readers about the issue in the comment section.